|
Neptune Washer Disassembly Pics |
|
NeptuneWaxMotor.com |
|
1. Remove AC power |
|
2. Remove dispenser lid bezel with #2 philips screwdriver |
|
3. Remove 4 screws with #2 philips screwdriver to remove |
|
4. Remove door |
|
5. Neptune with bezel and door off |
|
6. Pull front panel |
|
7. Pull front panel down and disconnect from washer base via two tabs |
|
8. Neptune with front panel removed |
|
9. Loosen the 5/16 screws to remove the top panel hold down brackets on each side of Nep |
|
10. Prop the top panel up to expose the door latch assembly and wax motor |
|
11. A close look at the door latch assembly - wax motor is the brownish device with the black actuator pin on the left |
|
12. Open control panel by removing (3) #2 Philips screws along the top edge. Pull the top of the console towards you while pushing the bottom of the console away from you to unhook the console from the top |
|
13. View of the upper control board. Remove circuit board and perform surgery on R11 and Q6… |
|
14. Closer view of the upper control board |
|
Click on picture to enlarge |
|
|
|
Sign up for the FREE Neptune Newsletter! |
|
(And by the way, I hate spam as much as you do, so your email is safe with me -- it's never rented, sold, or traded... ever!) |
|
Target Security LLC P.O. Box 286 Galloway, Ohio 43119 |
|
If you found this information helpful please consider a donation via Paypal... |